{"title":"Tie Rods","description":"\u003cp\u003eSteel tie rod systems for awnings and canopies, for walls and columns, and for vaulted ceilings: rods, brackets, and hardware, each system drawn to your span and finish.\u003c\/p\u003e","products":[{"product_id":"awning-tie-rods","title":"Awning \u0026 Canopy Tie Rods","description":"\u003cp\u003eAwning and canopy tie rods, also called tension rods or hanger rods, hold up a storefront canopy, door canopy, porch roof, or timber awning from the wall above it, with no posts underneath. Each one is a steel rod pinned to a bracket on the wall and a bracket on the canopy. We make complete awning tie rod systems in Texas, built to your measurements and priced online.\u003c\/p\u003e\n\n\u003ch2\u003eDesign your awning tie rods online\u003c\/h2\u003e\n\u003cp\u003eChoose your brackets, enter the distance between the two mounting points, and decide on a turnbuckle. Our designer works out the rod, clevises, and pins, shows the system in 3D, and prices it in 1\/2\", 3\/4\", and 1\" rods side by side before anything goes in your cart.\u003c\/p\u003e\n\u003cp\u003eMeasure either way: the diagonal distance between the mounting points, with the rod at 45°, or the horizontal and vertical distances between them for any other angle. Using your own brackets? Enter the distance between their pins instead. Each design is one tie rod with its two brackets, so set the quantity to the number of rods your awning needs.\u003c\/p\u003e\n\n\u003ch2\u003eWhat goes into each tie rod\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWall bracket:\u003c\/strong\u003e A steel face-mount bracket that fastens to the wall above the awning.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCanopy bracket:\u003c\/strong\u003e The same kind of bracket on the awning's beam or frame. The two ends can use different shapes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTie rod:\u003c\/strong\u003e 1\/2\", 3\/4\", or 1\" steel rod, up to 20 feet long, with a clevis and pin at each end, so it sits at whatever angle your awning calls for.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurnbuckle (optional):\u003c\/strong\u003e 6\" of take-up for tensioning and leveling the awning after it's installed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe rod with its clevises, pins, and turnbuckle is one canopy tie rod assembly; a bracket at each end completes the system.\u003c\/p\u003e\n\u003cp\u003eThe face-mount brackets come in three shapes: round (3 1\/32\" across), square (4\" × 4\"), and rectangular (1 1\/2\" × 6\"). You can also use your own brackets, or have us build to your architect's bracket design.\u003c\/p\u003e\n\n\u003ch2\u003eSteel, finish, and shipping\u003c\/h2\u003e\n\u003cp\u003eOur standard tie rods are carbon steel: ASTM A108 1018 cold-finished rod, C-1035 steel clevises and turnbuckles, and brackets of A36 steel plate. Every part ships unfinished or in our matte black powder coat, a durable finish suited to outdoor awnings; add powder coating in the cart. Unfinished steel rusts unless you finish it. For coastal or very wet locations, we also galvanize by quote, which adds to the lead time, and every part, brackets included, is also available in 316 stainless steel by quote, in mill finish (not polished or brushed).\u003c\/p\u003e\n\u003cp\u003eShipping is free in the lower 48 states, except rods over 7 feet, which pay a long-item rate.\u003c\/p\u003e\n\n\u003ch2\u003eHanger rods for storefronts and commercial canopies\u003c\/h2\u003e\n\u003cp\u003eIn the canopy trade, these are often called hanger rods or support rods: steel rods with adjustable ends and pins that hang a canopy from the building. Awning shops, canopy fabricators, and contractors can order just the hanger rods and brackets for a canopy they're building, priced online, or send us their drawings and we'll build to them.\u003c\/p\u003e\n\u003cp\u003eWe've shipped awning tie rods to customers in 42 states and Canada, from Michigan and California to Texas. Builders have hung the timber awnings on CAVA restaurants in League City, Texas; Indianapolis, Indiana; and Orlando, Florida, from our black steel tie rods. In League City the canopy hangs on ten 1\/2\" rods, and in Indianapolis on nine, each built to the builder's own bracket design, powder coated, and shipped in under three weeks. We supplied the builders, not CAVA. See \u003ca href=\"\/pages\/cava-awning-tie-rods\"\u003eawning tie rods at CAVA restaurants\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eCustom work is priced like everything on our site, by the pounds of steel and inches of weld, with no charge for design. \u003ca href=\"\/pages\/contact-us#quote\"\u003eRequest a quote\u003c\/a\u003e and include your drawings.\u003c\/p\u003e\n\n\u003ch2\u003eQuestions about awning tie rods\u003c\/h2\u003e\n\n\u003ch3\u003eHow many tie rods does my awning need, and how far apart?\u003c\/h3\u003e\n\u003cp\u003eThat depends on the canopy: its weight and length, how far it projects from the wall, and what the wall can carry. The number of rods and their spacing should come from your engineer, the canopy's maker, or another qualified professional, so we don't publish a rule of thumb. Once you know the count, order that many from the designer.\u003c\/p\u003e\n\n\u003ch3\u003eWhat angle should the rods be?\u003c\/h3\u003e\n\u003cp\u003eMany customers choose about 45°. At 45°, the wall bracket sits as far above the canopy as the canopy projects from the wall. Steeper rods pull less on the wall but need a wall bracket mounted much higher, while shallower rods sharply increase the forces.\u003c\/p\u003e\n\u003cp\u003eIt's also the most economical angle: for a given rod, 45° supports the most canopy for each foot of steel. The designer builds any angle you need, from the horizontal and vertical distances between the mounting points.\u003c\/p\u003e\n\n\u003ch3\u003eWhat rod diameter do I need?\u003c\/h3\u003e\n\u003cp\u003eThat's part of the same engineering decision, so we don't size rods by awning depth. The designer prices 1\/2\", 3\/4\", and 1\" rods side by side, and we make custom assemblies up to 2\" in diameter. The rated capacities of our turnbuckles and clevises, and nominal values for the rods, are on our \u003ca href=\"\/pages\/tie-rod-technical-specifications\"\u003especifications\u003c\/a\u003e page for your engineer.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I attach the brackets to brick, stucco, siding, or concrete?\u003c\/h3\u003e\n\u003cp\u003eOur brackets go on any wall: concrete, block, brick, stone, stucco, siding over framing, or timber. They take 1\/4\" fasteners as standard, and fasteners aren't included, so use ones made for your wall, such as masonry anchors in brick, block, or concrete, or lag screws into solid framing behind siding or stucco. Have your contractor or engineer confirm the attachment. Need a larger fastener? Tell us, and we can usually change the holes at no charge.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need a turnbuckle?\u003c\/h3\u003e\n\u003cp\u003eNot always. A turnbuckle joins two rods and gives 6\" of take-up, so you can tension and level the awning after it's up. Without one, the rod is one fixed length, with a little adjustment on each clevis's threads. A span that needs a rod longer than 20 feet needs a turnbuckle.\u003c\/p\u003e\n\n\u003ch3\u003eAre your tie rods stainless steel?\u003c\/h3\u003e\n\u003cp\u003eOur standard tie rods are carbon steel: unfinished, in matte black powder coat, or galvanized by quote. For coastal or very wet locations, every part, brackets included, is also available in 316 stainless steel by quote, in mill finish (not polished or brushed).\u003c\/p\u003e\n\n\u003ch3\u003eWhat do awning tie rods cost?\u003c\/h3\u003e\n\u003cp\u003eThe designer shows the price as you enter your measurements, for all three rod diameters, before anything goes in your cart. The price depends on the rod's length and diameter, the brackets, and the turnbuckle; powder coating is added in the cart. Custom work is priced by the pounds of steel and inches of weld.\u003c\/p\u003e\n\n\u003ch3\u003eCan you match brackets I already have, or my architect's design?\u003c\/h3\u003e\n\u003cp\u003eYes. Choose \"My own brackets\" in the designer and enter the distance between their pins, or send us drawings and we'll build to them.\u003c\/p\u003e\n\n\u003ch3\u003eDo you install?\u003c\/h3\u003e\n\u003cp\u003eNo. We make and ship the parts; your builder or installer fits them.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eTie rod systems are architectural hardware and are not engineered or load-rated for a particular structure. Have a qualified engineer confirm that a system suits your building before relying on it to carry load.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eMore tie rods: \u003ca href=\"\/pages\/architectural-tie-rod-assemblies\"\u003eall our architectural tie rods and tension rods\u003c\/a\u003e, \u003ca href=\"\/products\/wall-column-tie-rods\"\u003etie rods for walls and columns\u003c\/a\u003e, \u003ca href=\"\/products\/steel-collar-ties\"\u003esteel collar ties for vaulted ceilings\u003c\/a\u003e, and the \u003ca href=\"\/pages\/tie-rod-technical-specifications\"\u003etie rod, turnbuckle, and clevis specifications\u003c\/a\u003e.\u003c\/p\u003e","brand":"Timberplates","offers":[{"title":"1\/2\"","offer_id":67668322746644,"sku":"tie-rod-system-awning-1-2","price":228.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\"","offer_id":67668324450580,"sku":"tie-rod-system-awning-3-4","price":266.0,"currency_code":"USD","in_stock":true},{"title":"1\"","offer_id":67668324483348,"sku":"tie-rod-system-awning-1","price":334.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0432\/5985\/files\/tie-rod-system-awning.png?v=1791852807"},{"product_id":"wall-column-tie-rods","title":"Tie Rods for Walls \u0026 Columns","description":"\u003cp\u003eArchitectural tie rods with turnbuckles, also called tension rods, run straight across between two walls, columns, or posts and tie them together: slim black steel against timber, brick, or concrete, in a great room, a porch, a pavilion, or a storefront. We make complete wall and column tie rod systems in Texas, built to your measurements and priced online.\u003c\/p\u003e\n\n\u003ch2\u003eDesign your wall and column tie rods online\u003c\/h2\u003e\n\u003cp\u003eChoose how each end connects, enter the distance between the two ends, and decide on a turnbuckle. Our designer works out the rod and every fitting, shows the system in 3D, and prices it in 1\/2\", 3\/4\", and 1\" rods side by side before anything goes in your cart. Each design is one tie rod, so set the quantity to the number of rods you need.\u003c\/p\u003e\n\n\u003ch2\u003eThree ways to end a rod\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOur bracket:\u003c\/strong\u003e A steel face-mount bracket on the face of the wall, column, or post, round (3 1\/32\" across), square (4\" × 4\"), or rectangular (1 1\/2\" × 6\"). A clevis and pin hold the rod to it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough the wall or column:\u003c\/strong\u003e The rod passes through, and an ogee washer and heavy hex nut hold it on the far face. It's a clean, traditional look, for walls and columns up to 36\" thick.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eYour own bracket:\u003c\/strong\u003e Tell us the distance to its pin, and we build the rod to fit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe two ends can be different: a bracket on one side and through the column on the other, as drawn here.\u003c\/p\u003e\n\n\u003ch2\u003eTurnbuckles and rod lengths\u003c\/h2\u003e\n\u003cp\u003eA turnbuckle joins two rods and gives 6\" of take-up, so you can tighten the tie rod after it's installed. Two rods threaded into a turnbuckle, with a clevis or an ogee washer and nut at each outer end, make one tie rod assembly. Each rod runs up to 20 feet, so a longer span takes a turnbuckle; with one, the designer goes up to 40 feet between the ends. Without a turnbuckle, the rod is one fixed length, with a little adjustment on its clevis threads, or by tightening the nut on a through-the-wall end.\u003c\/p\u003e\n\n\u003ch2\u003eWalls, columns, and posts of any material\u003c\/h2\u003e\n\u003cp\u003eOur tie rods go between timber posts, wood-framed walls, brick, block, stone, or concrete. The face-mount brackets take 1\/4\" fasteners as standard, and fasteners aren't included, so use ones made for your wall or column and have your contractor or engineer confirm the attachment. Need a larger fastener? Tell us, and we can usually change the holes at no charge.\u003c\/p\u003e\n\n\u003ch2\u003eSteel, finish, and shipping\u003c\/h2\u003e\n\u003cp\u003eOur standard tie rods are carbon steel: ASTM A108 1018 cold-finished rod, C-1035 steel clevises and turnbuckles, and brackets of A36 steel plate. Every part ships unfinished or in our matte black powder coat; add powder coating in the cart. Every part, brackets included, is also available in 316 stainless steel by quote, in mill finish (not polished or brushed). We also galvanize by quote, which adds to the lead time. Shipping is free in the lower 48 states, except rods over 7 feet, which pay a long-item rate.\u003c\/p\u003e\n\n\u003ch2\u003eQuestions about wall and column tie rods\u003c\/h2\u003e\n\n\u003ch3\u003eIs a tie rod the same as a tension rod?\u003c\/h3\u003e\n\u003cp\u003eYes. Both names mean a steel rod that ties two parts of a building together and works in tension. We call ours tie rods.\u003c\/p\u003e\n\n\u003ch3\u003eCan a tie rod keep my walls from spreading?\u003c\/h3\u003e\n\u003cp\u003eOur tie rods are architectural hardware, not engineered or load-rated. If a rod has to carry load, such as holding walls together, your engineer decides whether ours suit the job. Our \u003ca href=\"\/pages\/tie-rod-technical-specifications\"\u003especifications\u003c\/a\u003e page has the part ratings they'll need.\u003c\/p\u003e\n\n\u003ch3\u003eWhat rod diameter do I need?\u003c\/h3\u003e\n\u003cp\u003eIf the rod carries load, that's your engineer's call. For looks, the designer prices 1\/2\", 3\/4\", and 1\" rods side by side, and we make custom assemblies up to 2\" in diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a wall or column tie rod cost?\u003c\/h3\u003e\n\u003cp\u003eThe designer shows the price as you enter your measurements, for all three rod diameters, before anything goes in your cart. Powder coating is added in the cart. Custom work is priced by the pounds of steel and inches of weld.\u003c\/p\u003e\n\n\u003ch3\u003eCan you build to my architect's design?\u003c\/h3\u003e\n\u003cp\u003eYes. \u003ca href=\"\/pages\/contact-us#quote\"\u003eRequest a quote\u003c\/a\u003e and include the drawings. There's no charge for design.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eTie rod systems are architectural hardware and are not engineered or load-rated for a particular structure. Have a qualified engineer confirm that a system suits your building before relying on it to carry load.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eMore tie rods: \u003ca href=\"\/pages\/architectural-tie-rod-assemblies\"\u003eall our architectural tie rods and tension rods\u003c\/a\u003e, \u003ca href=\"\/products\/awning-tie-rods\"\u003eawning and canopy tie rods\u003c\/a\u003e, \u003ca href=\"\/products\/steel-collar-ties\"\u003esteel collar ties for vaulted ceilings\u003c\/a\u003e, and the \u003ca href=\"\/pages\/tie-rod-technical-specifications\"\u003etie rod, turnbuckle, and clevis specifications\u003c\/a\u003e.\u003c\/p\u003e","brand":"Timberplates","offers":[{"title":"1\/2\"","offer_id":67668322812180,"sku":"tie-rod-system-wall-1-2","price":246.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\"","offer_id":67668324516116,"sku":"tie-rod-system-wall-3-4","price":318.0,"currency_code":"USD","in_stock":true},{"title":"1\"","offer_id":67668324548884,"sku":"tie-rod-system-wall-1","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0432\/5985\/files\/tie-rod-system-wall.png?v=1791852807"},{"product_id":"steel-collar-ties","title":"Steel Collar Ties for Vaulted Ceilings","description":"\u003cp\u003eSteel collar ties, also called rafter ties or vaulted ceiling tie rods, run across a vaulted ceiling from one side to the other, a slim black steel line across the room. They end on the rafters or pitched ceilings: a 2-point rafter tie with an optional turnbuckle, or up to 5 points from a center plate. We make every system in Texas, built to your measurements and priced online.\u003c\/p\u003e\n\n\u003ch2\u003eThe 2-point steel rafter tie\u003c\/h2\u003e\n\u003cp\u003eOne steel rod runs level from a bracket on one rafter to a bracket on the other. An optional turnbuckle at the center gives 6\" of take-up, so you can tighten the rod after it's installed. It's the simplest steel collar tie we make, and the one most customers choose.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrackets:\u003c\/strong\u003e Made for your roof's pitch, from 4\/12 to 18\/12. A face-mount bracket bolts to the face of a rafter or a finished ceiling; a one-hole or three-hole beam bracket saddles the rafter.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRod:\u003c\/strong\u003e 1\/2\", 3\/4\", or 1\" steel, pinned to each bracket with a clevis.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTurnbuckle:\u003c\/strong\u003e Optional. Without one, the rod is one fixed length, with a little adjustment on its clevis threads.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpan:\u003c\/strong\u003e Each rod runs up to 20 feet; with a turnbuckle joining two rods, up to 40 feet between the brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe rod, its two clevises, and the turnbuckle make one tie rod assembly; the two rafter brackets complete the collar tie.\u003c\/p\u003e\n\u003cp\u003eIt works rafter to rafter, across a finished gable ceiling, or from an exposed rafter on one side to a finished ceiling on the other.\u003c\/p\u003e\n\n\u003ch2\u003eMetal collar ties with 3, 4, or 5 points\u003c\/h2\u003e\n\u003cp\u003eFor a wider room or a bolder look, the level rods from each side meet at a steel center plate, and more rods run up from it. The center plate comes small or large, with or without a hole in its center.\u003c\/p\u003e\n\u003ch3\u003e3 points\u003c\/h3\u003e\n\u003cp\u003eLevel rods from each side meet at a center plate, with a vertical rod up to the ridge.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/steel-collar-ties?points=3\"\u003eDesign a 3-point system\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e4 points\u003c\/h3\u003e\n\u003cp\u003eLevel rods with two diagonal rods up to the rafters, all meeting at a center plate.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/steel-collar-ties?points=4\"\u003eDesign a 4-point system\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e5 points\u003c\/h3\u003e\n\u003cp\u003eLevel rods with a vertical rod to the ridge and two diagonal rods to the rafters, all meeting at a center plate.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/products\/steel-collar-ties?points=5\"\u003eDesign a 5-point system\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eCollar tie brackets\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAt the rafters:\u003c\/strong\u003e Pitched brackets made for your roof: face-mount, one-hole beam, or three-hole beam, for rafters 1 1\/2\" to 15\" wide and 3\" to 15\" deep.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor diagonal rods:\u003c\/strong\u003e Square (4\" × 4\") or rectangular (1 1\/2\" × 6\") brackets on the rafters.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAt the ridge:\u003c\/strong\u003e A face-mount bracket on a flat ridge beam or ceiling, or the rod passes up through the ridge beam to an ogee washer and nut.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eYour own brackets:\u003c\/strong\u003e Tell the designer the distance to their pins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFasteners aren't included. Tell the designer the diameter of your bolts or screws, from 3\/16\" to 1\", and we make the rafter brackets' holes 1\/16\" larger.\u003c\/p\u003e\n\n\u003ch2\u003eSteel, finish, and shipping\u003c\/h2\u003e\n\u003cp\u003eOur standard tie rods are carbon steel: ASTM A108 1018 cold-finished rod, C-1035 steel clevises and turnbuckles, and brackets of A36 steel plate. Every part ships unfinished or in our matte black powder coat; add powder coating in the cart. Every part, brackets included, is also available in 316 stainless steel by quote, in mill finish (not polished or brushed). Shipping is free in the lower 48 states, except rods over 7 feet, which pay a long-item rate.\u003c\/p\u003e\n\n\u003ch2\u003eCollar ties, rafter ties, and your engineer\u003c\/h2\u003e\n\u003cp\u003eIn building terms, a collar tie runs high, in the upper part of the roof, and a rafter tie runs low, near the tops of the walls. They do different jobs, and whether your roof needs either is up to your plans or your engineer.\u003c\/p\u003e\n\u003cp\u003eOur steel collar ties are architectural hardware. They aren't engineered or load-rated. Use them where your engineer or your plans call for a tie, or as a design feature under a structural ridge beam. Removing or raising an existing collar tie or rafter tie, or vaulting the ceiling of an existing house, needs an engineer first. Give your engineer our \u003ca href=\"\/pages\/tie-rod-technical-specifications\"\u003especifications\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eQuestions about steel collar ties\u003c\/h2\u003e\n\n\u003ch3\u003eCan I take out my wood collar ties and use steel ones?\u003c\/h3\u003e\n\u003cp\u003eNot without an engineer. Removing or raising an existing tie changes how the roof carries its load. Ask an engineer before you take any tie out, and have them decide whether a steel tie suits the job.\u003c\/p\u003e\n\n\u003ch3\u003eHow high should the tie sit?\u003c\/h3\u003e\n\u003cp\u003eWherever your plans or your engineer put it. In the designer, you enter the roof's pitch and the distance between the two brackets, and we make the brackets for that pitch.\u003c\/p\u003e\n\n\u003ch3\u003eWhat rod diameter do I need?\u003c\/h3\u003e\n\u003cp\u003eIf the tie carries load, that's your engineer's call. For looks, the designer prices 1\/2\", 3\/4\", and 1\" rods side by side, and we make custom assemblies up to 2\" in diameter.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does a steel collar tie cost?\u003c\/h3\u003e\n\u003cp\u003eThe designer shows the price as you enter your measurements, for all three rod diameters, before anything goes in your cart. Powder coating is added in the cart. Custom work is priced by the pounds of steel and inches of weld.\u003c\/p\u003e\n\n\u003ch3\u003eDo you install?\u003c\/h3\u003e\n\u003cp\u003eNo. We make and ship the parts; your builder or installer fits them.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eTie rod systems are architectural hardware and are not engineered or load-rated for a particular structure. Have a qualified engineer confirm that a system suits your building before relying on it to carry load.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003eMore tie rods: \u003ca href=\"\/pages\/architectural-tie-rod-assemblies\"\u003eall our architectural tie rods and tension rods\u003c\/a\u003e, \u003ca href=\"\/products\/awning-tie-rods\"\u003eawning and canopy tie rods\u003c\/a\u003e, \u003ca href=\"\/products\/wall-column-tie-rods\"\u003etie rods for walls and columns\u003c\/a\u003e, and the \u003ca href=\"\/pages\/tie-rod-technical-specifications\"\u003etie rod, turnbuckle, and clevis specifications\u003c\/a\u003e.\u003c\/p\u003e","brand":"Timberplates","offers":[{"title":"1\/2\"","offer_id":67668323238164,"sku":"tie-rod-system-ceiling-1-2","price":378.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\"","offer_id":67668324647188,"sku":"tie-rod-system-ceiling-3-4","price":463.0,"currency_code":"USD","in_stock":true},{"title":"1\"","offer_id":67668324679956,"sku":"tie-rod-system-ceiling-1","price":571.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0432\/5985\/files\/tie-rod-system-ceiling.png?v=1791852808"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0432\/5985\/collections\/render-tie-rods.png?v=1792029704","url":"https:\/\/www.timberplates.com\/collections\/tie-rods.oembed","provider":"Timberplates","version":"1.0","type":"link"}