Face-Mounted Rafter Tie Rod Bracket
Our one-
Face-mounted tie rod brackets are the easiest and most economical way to add a decorative tie rod assembly to your ceiling. Each bracket is installed with two vertically-aligned 1/4" wood screws allowing the bracket to be screwed to a traditional two-by rafter. Because these brackets do not have saddles that wrap around your rafter, they can be applied to a dry-walled ceiling after construction. Find the total span by measuring where you want your tie rod to go. Then buy two brackets, and one of our tie-rod assemblies that fits your total span.
Like all of our tie rod brackets, these brackets are made from 1/4" steel plate. (Grip plates are made from 3/8" plate for 1" rods.)
Face-mounted tie rod brackets are the easiest and most economical way to add a decorative tie rod assembly to your ceiling. Each bracket is installed with two vertically-aligned 1/4" wood screws allowing the bracket to be screwed to a traditional two-by rafter. Because these brackets do not have saddles that wrap around your rafter, they can be applied to a dry-walled ceiling after construction. Find the total span by measuring where you want your tie rod to go. Then buy two brackets, and one of our tie-rod assemblies that fits your total span.
Like all of our tie rod brackets, these brackets are made from 1/4" steel plate. (Grip plates are made from 3/8" plate for 1" rods.)
Note: tie rods are heavy, please be sure to screw the face-mounted bracket into a wooden rafter.
Pickup available at 1600 Hwy 84
Usually ready in 5+ days
Product information
All of our plates and connectors are cut from A36 steel. Our rods are fabricated from 1018 steel. If you need plates, connectors, or rods from custom metals like A572, 304/316 stainless, or other alloys, please contact us for a custom quote.
Shipping is calculated at checkout and will either be priority ground or LTL freight depending on the size and weight of the order. Please see our return policy for information on returns.